Organisation magnets with metal body

Extra strong office magnets, round, nickel-plated, made of NdFeB

Office magnet metal 23mm | © Brugger GmbH
Office magnet metal 23mm backside | © Brugger GmbH
technical drawing Extra strong office magnets round | © Brugger GmbH
Office magnet metal 23mm | © Brugger GmbH
Office magnet metal 23mm backside | © Brugger GmbH
technical drawing Extra strong office magnets round | © Brugger GmbH

Our extra strong office magnets with metal housing are round, nickel-plated and contain a magnet made of NdFeB. They offer impressive adhesive force for walls that have been treated with magnetic paint or magnetic plaster. Another advantage of our magnets is their ability to bridge air gaps. This means that they can maintain a strong adhesive force even in situations where there is a small gap between the magnet and the surface.

PRODUCT NOTE:
" Beware of very strong adhesive forces when placed directly on metal
" Particularly suitable for walls with magnetic paint or magnetic plaster
" Very good air gap bridging

As an alternative to the standard version, we also offer customised solutions:
" Painting in other colours possible

Data sheet
Product variants
Article numberD mmH mmAdhesive force* NWeight gPackaging unit
DSP19-Ndni197851210 Stück
Office magnet metal 19mm | © Brugger GmbH

Organisationsmagnete ø19mm aus NdFeB, vernickelt

Article number: DSP19-Ndni
D mm: 19
H mm: 7
Adhesive force* N: 85
Weight g: 12
Packaging unit: 10 Stück
DSP23-Ndni237.51302010 Stück
Office magnet metal 23mm | © Brugger GmbH

Organisationsmagnete ø23mm aus NdFeB, vernickelt

Article number: DSP23-Ndni
D mm: 23
H mm: 7.5
Adhesive force* N: 130
Weight g: 20
Packaging unit: 10 Stück
DSP29-Ndni2981603210 Stück
Office magnet metal 29mm | © Brugger GmbH

Organisationsmagnete ø29mm aus NdFeB, vernickelt

Article number: DSP29-Ndni
D mm: 29
H mm: 8
Adhesive force* N: 160
Weight g: 32
Packaging unit: 10 Stück

* The forces have been determined at room temperature on a polished plate made of steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg~10N). A deviation of up to -10% from the specified value is possible in exceptional cases. In general, the value is exceeded. The type of application (installation situation, temperatures, counter anchors, etc.) sometimes influence the forces enormously. The values given are for orientation purposes. Let our experts advise you.